Grandstream DP750 Guia De Inicio Rapido página 4

DP750 BASE STATION DESCRIPTION
Power
Input
Reset Network
Button Socket
POWERING UP/CONNECTING DP750
Power using PoE
Connect the network socket on the back of the unit to the
RJ-45 socket of a PoE Network Switch using the network cable
provided or 3 party network cable.
rd
Power using PSU
• Connect the network socket on the back of the unit to the
network connection socket using the network cable provided
or 3 party network cable.
rd
• Plug the power supply plug into a power source socket. Plug
the microUSB connector into related socket at the back of the
unit.
SUBSCRIBE HANDSETS TO DP750 BASE STATION
1. Open Subscription
• Access DP750 Web GUI and press subscribe button.
Or,
• Press and hold Radio/Page button on DP750 base
station
for 7 seconds until the Radio icon starts blinking.
2. Handset Registration
1. Access to DP730/DP722/DP720 menu → Registration →
Register.
2. Select "Base 1" and press "Subscribe" softkey.
3. DP730/DP722/DP720 will search for nearby base stations
and will display RFPI code and base station name of the
discovered DP750.
4. Press "Subscribe" to pair with displayed DP750.
~3~
Radio/Page
Button
ACCESSING DP750 WEB GUI
1. Power on DP750 and connect it to the network.
2. Connect a computer to same network as DP750.
3. Access "Network" directory on the computer.
4. Locate "DP750 - MAC" device and double click on it to
access web GUI.
Note: DP750 supports UPnP feature (by default enabled)
for auto discovery by computers in same network.
5. Enter admin's username and password to access the con-
figuration menu. ( The default username and password for
administrator are "admin" and "admin").
Notes:
• Users can access DP750 by entering its IP on a web browser
connected to same network.
• By default, DP750 is configured to get an IP from DHCP. To
know assigned, check "Network Status" menu on registered
DP730/DP722/DP720 handset.
• If no DHCP server is available, users can set static IP from
a registered handset. Go to "Network Settings" and set
"IP Settings" to "Static" and enter IP information. (Default
DP750 PIN is "0000").
Refer to online documents and FAQ for more detailed
information: http://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign
patern counterparts thereto) identified at www.cmspatents.com
~4~