Megger VF3 Guia Del Usuario página 2

The VF3 Voltage detector may help in the indication of live AC circuits only, and
must not be used as verification of a de-energised circuit. This is not a safety test
lamp.
If damaged, do not use.
This instruction guide and markings on the detector provide information for
avoiding hazards and unsafe practices related to the use of this tool.
Observe all of the safety information provided.
F WARNING - ELECTRIC SHOCK HAZARD :
„ Contact with live circuits can result in severe injury or death
„ Do not use the unit if it is wet or damaged
„ Do not apply more than the rated voltage between the
probe tip and earth ground
„ Do not operate with the case open
„ CAUTION: Do not attempt to repair this unit, it contains no
user-serviceable parts
„ Do not expose the unit to extremes in temperature or
high humidity
G
SAFETY WARNINGS