Quintezz GPS Early Warning System Manual De Usuario página 10

10. SN 0 (visible when radar is off)
11. ODO 0.0
12. AVG: 0
13. U: Kilo / Mile
14. GMT: 0
15. U1 .......Lat ..........Lon
16. Ver 03.1
17. DB: e.g. 9/11
each submenu will be described in the following chapters.
- To scroll through the menu, press the SETTING button.
- To enter a selected menu, press the SETTING button.
- To save a selection, press the SAVE button.
If no button is pressed within 3 seconds, the unit exits the menu.
4.2.1 RLOGIC: 0 / 1 / 2 / 3 / 4 / CITY
This function will only be visible whenever the Radar Detector function is enabled. The Radar Logic setting determines at which
speed the radar Detector starts working.
- Logic0: The Radar Detector works always, so starting from 0 km/h.
- Logic1: The Radar Detector starts working when the driving speed exceeds 20 km/h.
- Logic2: The Radar Detector starts working when the driving speed exceeds 40 km/h.
- Logic3: The Radar Detector starts working when the driving speed exceeds 60 km/h.
- Logic4: The Radar Detector starts working when the driving speed exceeds the maximum speed chosen manually by
you in the menu. (see chapter 4.2.5 'MAXIMUM SPEED')
- CITY: The Radar Detector works always, but the sensitivity is reduced to eliminate most false sources so that the unit
will not alarm for weak signals. There are many sources of false alarm signals near cities. There are for instance several
types of automatic doors that use the same signal as a radar. As soon as you have activated this CITY mode and you
have set the display information mode (see chapter 4.2.6 'DEFAULT /COMFORT /DETAILS...') to 'Comfort', the 'C' of CITY
is shown together with the heading of the compass:
E.g. Logic 2: Whenever de Radar Detector function is activated and you are driving 30 km/h, the Radar Detector is activated but will
not give you a warning as soon as it detects radar signals. As soon as your driving speed exceeds 40 km/h you will start receiving all
warnings. This function enables you to determine when the Radar Detector starts working in order to avoid false alarm signals.
If there is no connection between the GPS and the satellites, the Radar Detector will still work in RLogic0 setting, as long as it has
been enabled.
-GB-5-