Contents Of The Hydra-Cool™ Climber Pads; Assembling The Hydra-Cool™ Pads To The Climbers - Klein Tools Hydra-Cool 2214 Manual De Instrucciones

• Hydra-Cool™ Climber Pads Model No. 2214
(1 each) Left & Right Pads
•
(1 each) Left & Right Metal Inserts
•
• Instructions for the Proper Use, Assembly, Care and Maintenance
AFTEr rEMOVING OLd PAdS Or BEFOrE AddING PAdS TO A NEW SET OF CLIMBErS, FOLLOW THESE STEPS.
3 Match the Left and Right climbing pads to the Left and
Right climbers.
LEFT Climber marked with an "L"
4
2. CONTENTS OF HydrA-COOL™ CLIMBEr PAdS
3. ASSEMBLING THE HydrA-COOL™ PAdS TO THE CLIMBErS
1 Step into the climber,
placing the adjustable
sleeve to the inside of
the leg.
2 Adjust sleeve height
for proper fit, about 1"
(25 mm) below the knee.
Insert screws into the
two (2) aligned holes of
each climber, and tighten
the supplied nuts on the
screws to secure the
adjustment.
RIGHT Climber marked with an "R"
4 Install metal insert in climbing pad, assuring the text on the
metal insert is right-side up. Assure the metal insert you
are installing is on the correct side (left or right, signified
by "L" or "R" at the end of the part number) by matching the
last character on the metal insert ("L" or "R") with the last
character on the leather climbing pad ("L" or "R"). Push the
metal insert into the climber pad until the retaining bar is
against the slotted opening in the climber pad.