Donning The Assembled Hydra-Cool™ Pad And Climber To Your Leg - Klein Tools Hydra-Cool 2214 Manual De Instrucciones

5 Insert top shank of the climber with sleeve into tunnel slot opening
at the bottom edge of the pad. NOTE: Squeezing the tunnel from
the sides will aid in pushing the climber through the pad.
6 Continue pushing the climber through the tunnel until the
metal retaining bar is aligned with the sleeve loop.
Climber sleeve loop properly aligned with the retaining bar.
7 Feeding the Klein Kord retaining strap through the climber
®
sleeve loop.
Push the retaining strap and retaining bar through the climber
sleeve loop.
8 Pull the retaining strap completely through the sleeve loop
and retaining bar. Secure the Velcro
loops on the pad.
4. dONNING THE ASSEMBLEd HydrA-COOL™ PAd
ANd CLIMBEr TO yOur LEG
1 Step into the climber and pad assembly.
2 Secure the ankle straps.
hook end to the Velcro
® ®
5