Descargar Imprimir esta página

SSS Siedle LNG 600-0 Informacion De Producto página 3

Alimentador
Ocultar thumbs Ver también para LNG 600-0:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
English
Application
Power line rectifier in the switch
panel housing for the central supply
of LED modules and bus video
panels.
Application
The LNG 600-... is intended to
supply the bus video panels and LED
modules. Any other application is
deemed not in accordance with its
intended use and exonerates the
manufacturer from any liability.
Note
One LNG 600-... supplies max. 3
BVPC 850-... devices
Electrical voltage
• Mounting, installation and ser­
vicing work on electrical devices may
only be performed by a suitably
qualified electrician.
Failure to observe this regulation
could result in the risk of serious
damage to health or fatal injury due
to electric shocks.
• Operation at an altitude of up to
2000 m above sea level.
• Observe EN 62368­1!
In a building installation, an all­
pole mains switch with a contact
opening of at least 3 mm must be
Quantity
LEDS 600-.../LEDM 600-...
Current
1
150 mA
2
300 mA
3
450 mA
4
600 mA
provided. The device must not be
exposed to water drops or sprayed
water! Sufficient ventilation must be
ensured. Pay particular attention to
ensure that ventilation slots are not
covered.
• When using stranded cores as
cable material, these must be fitted
with wire end ferrules without fail.
Scope of supply
• line rectifier for top hat rail
mounting
• this product information
Mounting
1 Clip the line rectifier onto the top
hat rail.
Terminal assignment
L1, N
Power connection
+, ­
Voltage 30 V DC
Installation
The LNG 600-... is able to supply
several lights on a parallel basis. The
number differs depending on the
type of lights used.
Depending on the number of con­
nected lights, the maximum admis­
sible range of the cable must be
observed (0.8 mm core diameter).
The table shows the maximum
number of lights with the admissible
range.
LEDF 600-3...
Range
Current
830 m/2722 ft
260 mA
415 m/1368 ft
520 mA
275 m/902 ft
205 m/672 ft
Illuminated information sign
Steel
Size
(mm)
154 x 154
168 x 168
308 x 308
462 x 462
518 x 518
Specifications
Operating voltage: 100–240 V AC,
+/-10 %, 50/60 Hz
Operating current: 0.3 A to 0.7 A
Output voltage: 30 V DC
Output current: 1.1 A DC
Ambient temperature:
0 °C to +40 °C
Protection system: IP 20
Horizontal pitch (HP): 6
Dimensions (mm) W x H x D:
107 x 89 x 60
Remedying faults
The line rectifier is electronically
fused and switches off in case of an
overload or short circuit.
LEDF 600-4...
Range
Current
480 m/1574 ft
335 mA
240 m/787 ft
Current
Range
(mA)
(m)
125
750
125
750
215
550
375
300
425
250
Range
370 m/1214 ft
3

Publicidad

loading