ION Pathfinder 280 Guia Del Usuario página 8

Ocultar thumbs Ver también para Pathfinder 280:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
Light Mode
When Pathfinder
slowly fade from one color to the next. To pause on a certain color, press and hold the Light
button for 1 second. To enter Beat Sync mode and have the lights react to the beat of the
music, press and release the Light button. Press the Light button again to turn off the lights.
Bass and Treble Control
To adjust the EQ:
1.
Press the EQ button. "HI" (high frequency) will appear on the display.
2.
Turn the Control Knob to the left to decrease the high frequency.
3.
Turn the Control Knob to the right to increase the high frequency.
4.
Press the EQ button to confirm and adjust the low frequency.
5.
"LO" (low frequency) will appear on the display.
6.
Turn the Control Knob to the left to decrease the low frequency.
7.
Turn the Control Knob to the right to increase the low frequency.
8.
Press the EQ button to confirm.
Pairing a Bluetooth Device
1.
Make sure the speaker is within range of your Bluetooth device (no more than 100 ft. /
30.5 m away).
2.
Press the Bluetooth button on the speaker.
3.
Navigate to your Bluetooth device's setup screen. Then find and select Pathfinder 280˚.
Do not connect to Pathfinder 280_BLE; this is reserved exclusively for connecting to the
ION Sound XP™ app. If your Bluetooth device prompts for a pairing code, enter 0000.
Note: If you have previously connected to your Bluetooth device, Pathfinder™ 280˚ will
reconnect automatically.
Tip: Double-press the Bluetooth button to enable or disable the Bluetooth pairing voice
prompts.
To disconnect a paired Bluetooth device, press the Bluetooth button.
Linking Two Speakers
Note: Visit
ionaudio.com
1.
Power on Pathfinder
2.
Press and hold the Link button to enter Stereo Link mode. Once a link has been
established, the word LINK will appear in the display.
Note: It may take up to 1 minute to make the connection.
3.
Then, repeat this process on the other compatible ION speaker.
4.
To disconnect, double press the Link button on one of the two speakers.
8
280˚ is first turned on, the lights will be in Color Cycle mode and start to
for a list of compatible ION speakers to link to Pathfinder
TM
280˚ and the other compatible ION speaker.
TM
280˚.

Publicidad

Tabla de contenido
loading

Tabla de contenido