Operating Instructions; Before Using The Cooktop; Setting The Controls - Signature Kitchen Suite UPCE3064ST Manual Del Propietário

OPERATING
INSTRUCTIONS

Before Using the Cooktop

Before using the cooktop for the first time, clean
it thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and Cleaning
instructions in this guide. This will help protect the
ceramic surface and make future cleanup easier.
CAUTION
Never use scrub pads, abrasive or etching
cleaners. They can cause permanent damage to
the cooktop surface.

Setting the Controls

To operate the touch control pads, touch the pad
firmly with the flat part of your fingertip.
First Operation
The first time that power is supplied to the cooktop,
the display for the control lights for 1 seconds.
If you don't turn on the cooktop within 1 hour after
power is supplied to the cooktop, the display for the
controls blinks.
Activating the Cooktop
To turn ON the cooktop, touch
the POWER ON/OFF pad for
approximately 2 seconds.
The indicator above the pad will light.
To turn OFF the cooktop, touch the
POWER ON/OFF pad. The indicator
light above the pad will turn off.
NOTE
After turning on the cooktop with the POWER
ON/OFF pad, you must select one of the Cooking
Zones within 15 seconds using the Cooking Zone
ON pad(s). If no selection is made, the cooktop
will turn off for safety.

OPERATING INSTRUCTIONS

Selecting the Cooking Zone
To select the desired Cooking Zone,
touch the ON pad.
The display for the selected Cooking
Zone will light.
The power level indicator lights are
blinking but no power level is set
NOTE
Once the Cooking Zone has been selected with
the ON pad, the power level must be selected
within 10 seconds with the Element power
settings. Otherwise, the Cooking Zone will turn off
for safety.
Setting the Power Level
The power level for the selected Cooking Zone can
be set from 1 to 9.
To select the power level:
1
Select the number on the element power settings
for the active Cooking Zone to adjust the power
level from 1 to 9.
2
Selecting 7 will activate the Cook Zone. After
activating the Cook Zone, the indicator lights
flash once and the selection is stored.
NOTE
If power level is not selected, the
Cooking Zone will turn off after 10
seconds.
13