Connections (Satellite Speakers); Connecting The Cables - Teac LS-WH01 Manual Del Usuario

Speaker cables
o Use the included speaker cables or commercially
available cables designed for speakers.
o We recommend using the shortest speaker cables
possible.
o We recommend using left and right speaker cables of
the same length.
V CAUTION
Before connecting
Always turn the amplifier's power OFF before connect-
ing speakers.
After connecting
Turn the volume down completely before turning the
amplifier's power ON to prevent sudden loud noises.
Reconfirm that the speaker terminals have been con-
nected correctly and that cables are not contacting
other terminals.

Connecting the cables

Bare/sleeved wire
Insert the core wire through the hole in the terminal
completely and tighten the cap firmly.
Spade lugs
Place the spade around the terminal and tighten the cap
firmly.
o When using spade lugs to connect the speakers,
they should have an inside diameter of at least 8 mm
(3/8").
Connecting with an amplifier
Use speaker cables to securely connect the positive (+)
terminals on the amplifier with the positive (+) terminals
on the speakers, and the negative (−) amplifier terminals
with the negative (−) speaker terminals.

Connections (satellite speakers)

Speaker terminal
Red (right) +
Black (left)−
Example of connections with an
A-H01
9