SP scienceware H-B DURAC B60911-0100 Manual Del Usuario página 3

REGISTERED PAGE SETTINGS LAYOUT
11
(On iOS Only)
7
8
9
6
(On Android Only)
REGISTER UNIT
To add a new unit to view, press the [Add] button (1).
UNREGISTER UNIT
If you do not want to view a unit, press the [Unregister] button (7) to unregister the unit.
NAME UNIT
If you want to assign a name to the unit, press the [Text] button (2)
FIND A UNIT
To find a unit, press the [Light] button (3) to turn on the LED light of a unit. This will also indicate that the unit is on.
SET MAX/MIN CYCLE
To start maximum and minimum temperature recordings, press the [Time] button (4). Move the time scroll to set the hours and minutes for the
max/min recordings. For example if it says 23:59 the max/min cycle will automatically reset every day. For Android mobile device or phone, press
the [Cycle Time] button (10) to update the cycle time.
DATA DOWNLOAD REMINDER
To turn on or turn off the data download reminder function, slide the [Data Download] toggle (5).
COMPLETE SETTINGS
When the unit settings are finished, press the [Back] button (11) for iOS or the mobile device
or phone's [Back] button for Android to go to the Unit List Page, to use recording data.
UNIT LIST PAGE
8
(On iOS Only)
1
2
SETTING ALARMS/ALERTS
To set Temperature Alarms, Index Alert or check the Maximum or Minimum readings, touch the unit readout on this window
to enter the Setting Page for that unit.
1
2
3
4
5
10
(On Android Only)
The Temperature Window will display the readings and levels of all
7
indexes (1). (Readings will vary with unit function type.)
6
If unit and the mobile device or phone are out of range from each
3
other, the transmission will be paused until connection is restored.
4
The Temperature Window (2) will turn gray without reading.
5
Press the [Light] button (3) to light up the LED for 5 seconds.
This will help locate where the unit is and if it is on.
The Battery Capacity Status (4) icon will show the strength
of the battery.
The Temperature Alert Indicator (5) indicates if an alert is on.
The Bluetooth Connection Strength (6) icon indicates
the strength of the Bluetooth signal.
Press the [Register] button (7) to register or unregister the unit.
Press the [Back] button (8) for iOS or the mobile device or phone's
[Back] button for Android to go to the opening page in the app.
SYNCHRONIZE TIME
Press the [Sync] button (8) to synchronize
the time on the unit with time on your mobile
device or phone.
NOTE:
This procedure is needed every time the unit is
turned on or the batteries are changed.
If the Time Sync Reminder icon (9) is on, this
means that there is a time difference of 15 minutes
or more between the unit and the mobile device
or phone. It is recommended that the time be
synchronized again.
NOTE:
For iOS, the mobile device or phone time will be
checked automatically. For Android, press the
[Time Check] Button (6) to check the current time
of the mobile device or phone when the Time Sync
Reminder icon is seen. If the Time Sync Reminder
icon is still on after the time check,
please synchronize the time again.
Always synchronize with only one mobile device
or phone to ensure that the date stamp of the
download data functions properly.
3