D-Link DKVM-4K Guia De Instalacion página 2

Check Your Package Contents
DKVM-4K PS/2 KVM Switch
Installing the DKVM-4K
The DKVM-4K is a hot-swappable KVM switch. You do not need to turn your
computers off before installing the Device.
A.
Attach your 6-pin PS/2
keyboard connector to the
console keyboard port of
DKVM-4K.
D.
Attach the KVM cable
(keyboard connector) to the
PS/2 keyboard port located on
the DKVM-4K.
The following steps below apply to each computer that you are using with your DKVM-4K.
G.
Attach the KVM cable
(keyboard connector) to the
PS/2 keyboard port located on
the back of your computer case.
Installation of the DKVM-4K is now complete.
Quick Installation Guide
DKVM-4K
4-PORT PS/2 KVM SWITCH
Quick Installation Guide
B.
Attach your 6-pin PS/2 mouse
connector to the console mouse
port of DKVM-4K.
E.
Attach the KVM cable (mouse
connector) to the PS/2 mouse
port located on the DKVM-4K.
H.
Attach the KVM cable (mouse
connector) to the PS/2 mouse
port located on the back of your
computer case.
2 sets 1.8m 3-in-1 KVM Cable
C.
F.
I.
1
Attach your monitor's HDDB 15
VGA connector to the console
port of the DKVM-4K.
Attach the KVM cable (VGA
connector) to the VGA port
located on the DKVM-4K.
Attach the KVM cable (VGA
connector) to the VGA port
located on the back of your
computer case.