Troubleshooting; Technical Specifications - Tennant V-WD-9 Manual Del Operador

TROUBLESHOOTING

Problem
Machine does not run
Machine has little or no
suction

TECHNICAL SPECIFICATIONS

Voltage/Frequency
Current
Water lift
Tank Capacity
Standard paper bag capacity
Power cord length
Weight
Protection
Cause
Machine not plugged to wall outlet
Faulty power cord
Faulty vacuum motor
Hose is clogged
Holes in hose
Intake is clogged
Head is not securely latched
Worn gasket which is leaking air
Tank or bag is full
suction due to high level of liquids
inside the tank
Drain hose cap is loose (V-WD-24
model)
V-WD-9
120 V, 60 Hz
200 m 3
2530 mmH
9.7 kg / 21,4 lb
IPX4
Solution
Turn switch to on
Plug power cord to wall outlet
Contact service center
Contact service center
Contact service center
Clear hose
Replace hose
Remove
obstruction
Close both latches down securely
Inspect all gaskets, replace if
necessary
Tighten cap (V-WD-24 model)
V-WD-24
120 V, 60 Hz
200 m
2530 mm H
2
19 kg / 41.9 lb
IPX4
TENNANT V-WD-9 / V-WD-24
EN
hose and clear
3
2
11