Dimensions Of Wear For Diameters And Lengths Of The Pokers; Periodic Mantenance Of Motor - Enarco AVMU Manual De Instrucciones

7 DIMENSIONS OF WEAR FOR DIAMETERS AND LENGTHS OF
THE POKERS
A.
B.
C.
D.
8

PERIODIC MANTENANCE OF MOTOR

1.Only an expert shall work on the electrical parts.
2.Make sure that the electricity is off during repairs.
3.In all maintenance operations, original parts will be used.
4.A periodic lubrication of the converters' bearings is not necessary.
Every 50 hours carbon brushes should be inspected .They should be changed if effective length is
under 8 mm. Change the brushes:
6.Clean the ventilation vents in the front and back part of the converter periodically to avoid
overheating. Clean or change air filter in the back part.
7.After maintenance job and service, all safety devices should be assembled correctly.
8.After working 40 hours inspect the housing's holding bolts.
9.Every 12 months or more frequently, depending on the usage conditions, it's recommended a
inspection be done by an authorized dealer.
AVMU MOTOR - FLEXIBLE SHAFT AND POKERS
TAX1m, TAX1-5m, TAX2m, TAX3m, TAX4m, TAX5m, TAX6m
DIAMETER
MODELO
(mm)
23,5 (25)
AX 25
AX 32 30,5 (32)
38,5 (40)
AX 40
AX 48 45,5 (48)
AX 58 55,5 (58)
The minimum dimensions are bold printed.
The dimensions into brackets are the original dimensions.
Replace the housing when reach the minimum diameter.
Replace the tip when reach the minimum length.
a) With a screwdriver remove the side cap of the housing, introducing the screwdriver
between the cap and the housing and lever it.
b) We find the brush retainer (code 103652), this is a treated part, with a screwdriver.
Remove it and so we can see the brush code 103653 (230v) and 103654 (115v), turn the
motor the brush goes out or introduce a thin tool to remove it.
c) to assemble introduce the new brush and thread the retainer and finally close the
housing with the cap.
d) Running motor for 5 minutes without shaft neither poker.
AVMU - AX25, AX32, AX40, AX48, AX58
LENGTH(mm)
310 (320)
360 (366)
320 (325)
330 (335)
339 (344)
en
9