Tensioning The Chain; Filling With Oil - Trueshopping MFS260C Manual Del Usuario

• Turn the tightening screw (Circled)
clockwise until the chain on the
underside of the rail is slightly
hung up and the links are located
into the groove of the guide rail.
•
Refit the chain guard and tighten
the nut by hand.

Tensioning the chain

A new chain has to be tensioned
frequently remember to check the
chain tension regularly.
To do this –
1. Stop the engine and loosen the
guard nut.
2. Keep the guide rail tip pointing
upwards.
3. Use a screwdriver to tighten the
clamping screw clockwise until the
chain once again rises tightly against
the underside of the rail.
4. Retighten the nut.

Filling with oil

For the purpose of automatic and reliable
lubrication on the chain and guide rail, please
use high-quality environmentally friendly
lubricating oil mixed with adhesive additive.
The need for maintenance depends on the
quality of lubricating oil. Therefore using
designated chain lube is ideal.
To fill the chain pruner with oil-
•
Remove the black plastic cap on
the chain pruner by turning it anti
clockwise.
•
Fill with oil and then replace the
cap.
If the oil level in the tank doesn't fall, there
may be a problem in the oil supply:
Check the state of lubrication of the
chain, clean the oil line and contact your
supplier if required.
9