Getting Started; Connection Methods - Sony PS3 PlayStation 3 Manual De Instrucciones

Getting started

Connection methods

HDMI OUT AV MULTI OUT

connector
Caution
Any TV or component connected to the system
must be functioning properly and free of defects. If
a TV or component connected to the system is
faulty or defective, it may cause damage to the TV
or component, or to the system itself. As with all
electrical products, connection to faulty or
defective components, or the failure to connect to a
properly wired outlet, may cause sparking and
pose a fire hazard.
If video is not displayed on the screen
If you change the type of cable used to connect the
system to a TV, video may not appear on the screen. If
video does not appear, turn off the system and then
turn it on again by pressing the power button for at
least five seconds (until the system beeps twice). The
video output setting will be reset and video will be
output at standard definition (SD) resolution.
 Connect your system to a TV
You can use any of the following methods to connect your system to a TV.
Video output in SD (Standard Definition) resolution
connector
AV MULTI OUT
connector
Video output in HD (High Definition) resolution - component video
AV MULTI OUT
connector
Video output in HD (High Definition) resolution - HDMI™
HDMI OUT
connector
Hints
 For details about video output cable types and supported video modes, see "Video output on the
PS3™ system" (
 You can connect audio devices that support digital audio playback, such as an AV receiver for home
entertainment use. For details, see "Connecting digital audio devices" (
AV Cable
Component AV Cable
(sold separately)
HDMI Cable (sold separately)
page 16) and "Video output cable types" (
TV
TV
TV
page 17).
page 20).
US
13