User's Manual—Read before using this equipment
DEVICE INSTALLATION
Pole installation
As the below image shows: Take out the bolts and washers from the accessories
bag for pole installation and attach the light to the pole with the U-bolts.
M6 big flat washers
M6 spring washer
M6 nut
U-bolts
Wall installation
Drill 4 holes in the wall that match the holes in the mounting plate and insert the
expansion bolts. Place the washers on the bolt as indicated and tighten the nuts
to secure the light to the wall.
M6 big flat washers
M6 spring washer
Expansion bolts
M8 nut
Please install the solar light in a place without any shade and facing direct
sunlight for better charging.
©2021 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
4