Tabla de contenido
Publicidad
The probe electronics 160 402 is a unit of temperature control zone,
EN
usually used for the detection of temperature in rooms where the
temperature setting remains constant.
This is usually installed in the bathroom of the room, in the hallways,
in dining rooms, in meeting rooms, etc ...
You can set the temperature just by software with programming slots.
The electronic thermostat is usually mounted in a location where it can
detect as accurately as possible the actual temperature of the
area in question.
FEATURES
- SELF-DIAGNOSIS WITH DIRECT INDICATION TO SOFTWARE MALFUNCTIONS
- ADDRESSING SOFTWARE
- DIRECT REPROGRAMMING ALSO BY SOFTWARE
- MICROPROCESSOR WITH FLASH MEMORY WHICH AVOIDS THE BACK-UP BATTERIES
- THE CONNECTORS FOR DATA TRANSMISSION ARE PULL-OUT (RJ 11)
- MAINTAINS SETTINGS EVEN IN THE CONTROLLER TURNED OFF
- ABILITY TO DIRECTLY CONTROL MODULE FOR THE FAN COIL MOTOR
- EXTERNAL COMMUNICATION: RS 485
Power supply voltage
Total absorption
Hike max temperature
External temperature probe
protection
approvals
Operating Temperature
Storage temperature
Relative air humidity
TECHNICAL CHARACTERISTICS
24Vdc (from the control room)
30 mA
+50°C
NTC 10Kohm a 25°C
IP 30
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
Publicidad
Tabla de contenido
