Technical Characteristics - EYEON 160401 Manual Tecnico

The digital thermostat 160401 is a control room temperature,
EN
designed for easy viewing and setting functions by the user.
You can view
simple approach to computer software as well as the limitations
maximum and minimum user to use the keypad lock, adjusting
temperature, switching on and off of the unit and lock the win-
dow open. The transition from manual to automatic functions
is managed directly by the apparatus according to the same keystrokes.
The room thermostat is usually mounted in a position in which
can be clearly visible by the user and in the case where the probe is used
board must
of the room where it can detect as much as possible the actual temperature.
FEATURES
- TEMPERATURE DISPLAY OF THREE-DIGIT
DISPLAY
- CONTROL OF SETPOINT AND MINIMUM
MAXIMUM TEMPERATURE
- CALIBRATION OF THE SET POINT PROBE
- ABILITY TO DISPLAY THE ACTUAL
TEMPERATURE OR SET
- VIEW AND CHANGE SET-POINT
- FUNCTION KEYS UP - DOWN - ON / OFF
AND SPEED FAN COIL
- FEATURES BOTH AUTOMATIC IN MANUAL
- INDICATION OF FAN SPEED COIL LED
- LED INDICATOR ON
- SELF-DIAGNOSIS DISPLAY DIRECT
SOFTWARE MALFUNCTION
Power supply voltage
Total absorption
Hike max temperature
External temperature probe
protection
approvals
Operating Temperature
Storage temperature
Relative air humidity
the actual
also consider

TECHNICAL CHARACTERISTICS

temperature
the positioning
- ADDRESSING SOFTWARE
- DIRECT REPROGRAMMING ALSO BY
SOFTWARE
- MICROPROCESSOR WITH MEMORY
FLASH WHICH AVOIDS THE BACK-UP
BATTERIES
- THE CONNECTORS FOR DATA
TRANSMISSION ARE PULL-OUT (RJ 11)
- MAINTAIN SETTINGS ALSO IN THE
CONTROLLER TURNED OFF
- ABILITY TO CONTROL DIRECTLY IN THE
FORM TO THE FAN COIL MOTOR
- EXTERNAL COMMUNICATION: RS 485
24Vdc (from the control room)
30 mA
+50°C
NTC 10Kohm a 25°C
IP 30
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
or the set
in
with a
a zone