JVD Shield Instrucciones De Uso página 18

OPERATING THE SHIELD
1. PLUG IN AND TURN ON YOUR SHIELD
Wait a few moments for the HOME screen to
be displayed. This initialisation time is shown
2. SELECT YOUR ROOM SIZE
After the appliance has finished starting up, the screen will ask you to select your room size.
GB
For an area with greater restrictions, you
can change the room size setting to boost
3. SELECT THE PURIFICATION MODE
CONTINUOUS mode: For continuous
protection, activate this mode to purify the air
in your room for 8 hours.
USING CONTINUOUS MODE
The Shield was designed using a JVD
technology. CONTINUOUS mode provides
optimum purification for a period of 8 hours and
shows on the screen as a slow glow/fade.
Purification duration: 8 hours
MODE
18
® patented
PURPOSE
Activating
the mode
Changing the area
being purified
Switching
to BOOST mode
by a progressively illuminated JVD logo in the
centre of the screen.
10 - 20 m
20 - 40 m
40 - 60 m
performance. For areas greater than 60 m
is best to add another Shield.
BOOST mode: In the event of unusual events
(strong odours or greater risk of contamination
or pollution), activate BOOST mode to
intensively purify the air in your room.
After the 8-hour purification, the cycle ends.
The Shield will then await further instructions.
ACTIONS
Press CONTINUOUS to start the
The Shield will start performing the
During a CONTINUOUS purification
cycle, you can change the area
being treated. Select a new area by
pressing the desired button.
Press BOOST to start a shock
purification. Refer to the BOOST
section of these instructions for
information about this mode.
2
2
2
EXPLANATIONS
8-hour purification cycle.
purification cycle.
2 , it