Mute; Source; Display; Mts-Ntsc Only - memorex MLT1912 Guia Del Usuario

MUTE

1
Press the MUTE button to turn off the sound. The TV's
sound will be silenced and the Mute indicator will appear at
the bottom left of the screen. The sound can be turned
back on by pressing this button again; the Mute indicator
will disappear from the screen.

DISPLAY

1
Press the DISPLAY button once to show the mode
(channel number if in TV (NTSC) or ATSC mode). Press a
second time to clear the screen or wait three seconds and
the screen will clear automatically.
TV OPERATION (CONTINUED)

SOURCE

Repeatedly press this button to cycle through the device(s)
connected to the INPUT jacks: ATSC, TV (CATV), AV, S-
VIDEO, YUV and PC).
MTS–NTSC ONLY
Press to select one of the following sound modes:
STEREO: Select for channels that are broadcasting
in stereo.
MONO: Select for channels broadcasting in mono or if you
are having difficulty receiving a stereo signal.
SAP (Second Audio Program, if available): Select to listen to
a Separate Audio Program which is usually a foreign
language translation.
NOTES:
•
•
•
23
1
1
MTS is for TV mode only; you can only set the MTS
option while in the TV mode.
MTS can support STEREO (First Audio Program) and
SAP (Second Audio Program).
If the TV channel is broadcasting in stereo and the
reception is strong enough, "MONO" will change to
"STEREO" automatically. You cannot select between
"MONO" and "STEREO" in MTS setting.