NAD 310 Manuel Del Usario página 32

SPECIFICATION - NAD 310 INTEGRATED AMPLIFIER
Power Amplifier Section
Stereo Mode
CONTINUOUS AVERAGE POWER OUTPUT INTO 8
(Min. power per channel, 20Hz-20kHz, both
channels driven, with no more than rated
distortion)
Rated distortion (THD 20Hz-20kHz)
Clipping power
(maximum continuous power per channel)
IHF dynamic headroom at 8
IHF dynamic power
Slew rate
Damping factor (ref. 8 50Hz)
Input impedance
Input sensitivity (for rated power into 8 )
Voltage gain
Frequency response 20Hz - 20kHz
Signal/Noise ratio, A weighted
THD (Total Harmonic Distortion, 20Hz-20kHz,
from 250mW to rated output)
SMPTE I.M. (IM distortion, 60Hz+7kHz, 4:1,
from 250mW to rated output)
IHF I.M.
(CCIF IM distortion, 19+20kHz at rated output)
Preamplifier Section
Phono Input
Input impedance (R and C)
Input sensitivity (ref. rated power, 1kHz)
Input overload at 20Hz/1kHz/20kHz
THD (20Hz-20kHz) and IM dist.
RIAA accuracy
Signal/Noise ratio
(A-weighted with cartridge connected)
Line Level Inputs (CD, Video, Tuner, Tape, Aux)
Input impedance (R and C)
Input sensitivity (ref. rated power)
Maximum input signal
Signal/Noise ratio, A-weighted
Frequency response 20Hz-20kHz
Infrasonic filter
Line Level Outputs
Preamp output impedance
Tape output impedance
Headphones output impedance
Maximum output level
Controls
Treble
Bass
Physical Specification
Dimensions in mm (Width x Height x Depth)
NAD
32
20 W
0.05%
25 W
+3 dB
8 : 40 W (17 dBW)
4 : 60 W (17.8 dBW)
2 : 80 W (18.7 dBW)
>20 V/usec
>100
N/A
1 V
X 60(35.6dB)
+ 0.3 dB
-3dB at 10Hz/70 kHz
Min. vol.. 100dB ref. 1W
<0.05%
<0.05%
<0.05%
n/a
n/a
n/a
n/a
n/a
n/a
80 k + 220 pF
210 mV
>10 V
93 dB ref. 1W
106 dB ref. rated power
+0.5 dB
-3dB at 10 Hz
12 dB/octave
n/a
n/a
n/a
preamp-out n/a
tape out >5 V
headphones out n/a
+7dB at 100Hz
+6dB at 10kHz
435 x 65 x 250
NAD ELECTRONICS LTD
LONDON
© 1994 310 I.M.