Publicidad
Idiomas disponibles
Idiomas disponibles
5 - Programing mode ( standalone )
STANDALONE
Setting
JNF
Authorization Card
The authorization card will be set at the factory following the lock itself.
Create User Card (Max 100, Max 5 groups)
Create Group 1: Bring the authorization card, the LED flashes blue, aproche one by one the cards
want to add the reader. Aproach authorization card to close the programing.
pass authorization card
To add a new card to the group 1 just follow the same instructions, previously entered cards do not change.
Create Group 2: .Approach the authorization card 2 times, the LED flashes blue, close one by one
cards you want to add the RF. (Within 6 seconds without card, the LED stops flashing)
passar cartão de autorização
To add a new card to the group 2 just follow the same instructions, previously entered cards do not change.
Create Group 3: .Approach the authorization card 3 times, the LED flashes blue, close one by one
cards you want to add the player. Skip authorization card to close the program.
Create Group 4: Bring the authorization card 4 times, the LED flashes blue, close one by one
cards you want to add the player. Skip authorization card to close the program.
Create Group 5: .Approach the authorization card 5 times, the LED flashes blue, close one by one
cards you want to add the player. Skip authorization card to close the program.
Manual de instalação / Installation Manual / N
electronic lock .
pass all the cards
User Group 1.
passar todos os cartões de
utilizador do grupo 2.
otice d'instructions /
pass the authorization card
to close the program
passar o cartão de autorização
para fechar a programação
Manual de instalación -
MI190-0
EN
www.jnf.pt
16/32
Publicidad
