Usage - FAR TMS 0016 CI Manual Del Usuario

ENGLISH
Put the required comb on the cutting head with
the teeth facing upwards and press down on the
clip located on the bottom metal edge of the
cutting head (see illustrations below). Make sure
that the comb is securely held in place before
beginning trimming or cutting hair/hair.
INSTRUCTIONS FOR USE
Verify that the appliance is fully charged before
starting to use it. It is not possible to operate the
appliance from the mains supply when its battery
is not charged.
Note: Do not move the appliance too fast. Use
soft and fluid movements.
GB-12

USAGE

For optimal cutting performance
• The hair must be clean and dry. Before use,
the cutting head must always be oiled. For
this, use the blade oil provided.
• Turn on the appliance by pressing its on/
off switch. We recommend that you first cut
a small area to familiarise yourself with the
comb.
• Position the clippers in the opposite direction
of the direction of hair growth with the teeth
of the comb directed upwards, but flat against
the head.
• Move the clippers upwards and outwards in
the hair, a little each time, in the opposite
direction to the hair growth.
• The appliance is more effective if you let it
cut the hair at its own speed. Never force the
clippers through the hair. Never turn off the
clippers when their are in the hair.
• For long hair at the top of the head, hold the
hair between the fingers and cut to the desired
length. Always work from the front to the
back of the head.
ENGLISH
GB-13