Siemens Gigaset SE505 Guia De Manejo Rapida página 30

Quick Installation Guide
Connecting and configuring additional PCs (optional)
If you have configured a PC for working with the router, you can connect additional PC's
to it. You will need an additional cable for each PC which you wish to connect with a
cable. For the wireless connection of additional PC's, you will need a wireless network
adapter, e.g. a Gigaset PC Card 54 or a Gigaset PCI Card 54.
Wireless
1. Install wireless network adapters in the other PC's as described in the corresponding
operating instructions, making sure that the SSID of all wireless network
components is identical. The factory set SSID is ConnectionPoint. You should
change this setting at a later date for security reasons.
2. Set up the network for each newly connected PC. This can be done by following the
steps described on page 23.
3. Always restart the PC.
Wired
1. Connect the network card of each additional PC to a free LAN port (LAN1 – LAN4)
on the router using an Ethernet cable.
2. Make sure that the corresponding LAN LED on the front of your Gigaset SE505 dsl/
cable flashes.
3. Set up the network for each newly connected PC. This can be done by following the
steps described on page 23.
4. Restart the additional PC's.
28