English; Setting The Temperature - Philips GC6600 Serie Manual De Instrucciones

ENGLISH

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support
that Philips offers, register your product at www.philips.com/welcome.
Read this user manual, the important information leaflet, and the quick start guide on the
packaging carefully before you use the appliance. Save them for future reference.
General description (Fig. 3)
1 Water tank filling funnel
2 Carry lock (specific types only)
3 'Iron ready' light
4 Calc-Clean button with Calc-Clean light
5 Steam trigger
6 Temperature dial
7 Heel
8 Supply hose
9 On/off switch
10 Mains cord
11 Mains plug
12 Hose storage compartment
13 Water tank
14 Smart Calc-Clean container

Setting the temperature

To set the required ironing temperature, turn the temperature dial to the appropriate position.
The appliance adjusts the steam automatically, depending on the ironing temperature set.
Temperature setting
SYNTH to 1
2
3 to LINEN
Recommended water to use: distilled or demineralised water
Your appliance has been designed to be used with tap water. If you live in an area with hard water,
fast scale build-up may occur. It is therefore recommended to use distilled or demineralised water
to prolong the lifetime of your appliance.
Do not add perfume, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids,
chemically descaled water or other chemicals, as they may cause water spitting, brown staining
or damage to your appliance.
4239_000_9025_3_Booklet Simple_A5_v4.indd 6
Automatic steam setting Fabric type
Synthetic fabrics (e.g., acetate, acrylic,
nylon, polyamide)
Wool, viscose, polyester and silk
Cotton, linen
6/2/15 10:06 AM