Technical Data - LaserLiner SmartLine-Laser 360 Manual Del Usuario

Due to the special optics required to generate a continuous 360° laser
!
line, the underlying technology may cause differences in brightness in
different areas of the line. This may lead to different ranges in hand
receiver mode.
4
Slope mode
Do not release the transport restraint, set the ON/OFF switch to „OFF".
Select and switch on the laser with the selection button. Sloping planes
can now be measured. This mode cannot be used to perform horizontal
or vertical levelling as the laser lines are no longer aligned automatically.
The LED lights constantly red.
LASER

Technical data

Self-levelling range
Accuracy
Operating range (depending on room illumination)
Working range with hand receiver (depends on how
the technology affects the difference in brightness)
Laser wavelength
Laser class / line laser output power
Power supply
Operating time
Operating temperature
Storage temperature
Dimensions (W x H x D)
Weight (incl. batteries)
Subject to technical changes without notice. 07.2015
LASER LASER
SmartLine-Laser 360°
LASER LASER
± 5°
± 0.4 mm / m
20 m
10 - 30 m
635 nm
2 / < 1 mW
4 x 1.5V alkaline batteries
(type AA, LR6)
approx. 35 hours
0°C ... +40 °C
-10°C ... +70 °C
75 x 130 x 100 mm
525 g
11
GB