General Safety Instructions - LaserLiner SmartLine-Laser 360 Manual Del Usuario

Read the operating instructions and the enclosed brochure „Guarantee
!
and additional notices" completely. Follow the instructions they
contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
The automatic cross-line laser with integrated hand receiver
mode for aligning tiles, wall studding, windows, doors etc.

General safety instructions

– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications. Modifications or changes to the device
are not permitted, this will otherwise invalidate the approval and safety
specifications.
!
Always turn off all lasers and latch the pendulum in place before
transporting, ON/OFF switch in its „OFF" position!
08
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2007-10