Wash cycles and functions
Table of wash cycles
Description of the wash cycle
Everyday wash cycles (Daily)
Cottons (*) (1st press of the button): extremely soiled whites.
Cottons (2nd press of the button): heavily soiled whites and resistant colours.
Cottons (3rd press of the button): heavily soiled whites and delicate colours.
Synthetics (1st press of the button): heavily soiled resistant colours.
Synthetics (2nd press of the button): lightly soiled resistant colours.
Mix 30' (1st press of the button): to refresh lightly soiled garments quickly
(not suitable for wool, silk and clothes which require washing by hand).
Mix 15' (2nd press of the button) : to refresh lightly soiled garments quickly
(not suitable for wool, silk and clothes which require washing by hand).
Silk/Curtains: for garments in silk and viscose, lingerie.
M
Memory: allows for any wash cycle to be stored.
Wool: for wool, cashmere, etc.
Drying Programmes
Cotton dry (1st press of the button):
Synthetics dry (2nd press of the button)
Wool dry (3rd press of the button)
Partials wash cycles
Spin
Rinse (1st press of the button):
Pump out (2nd press of the button)
For all Test Institutes:
*
Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C.
Wash functions
Stain removal
This function is particularly useful for the removal of stubborn stains.
3
1
2
pour in the detergent and any fabric softener you wish to use, set
the desired wash cycle and enable the "Stain removal" function.
!
It cannot be used with the
,
programmes".
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
!
It cannot be used in conjunction with the
and "Drying programmes".
Place extra compartment 3
(supplied). When pouring in
the bleach, be careful not to
exceed the "max" level marked
on the central pivot (see figure).
To run the bleach cycle on its
own, pour the bleach into extra
compartment 3, set the "Rinse"
programme and activate the
"Stain removal" programme.
To bleach during a wash cycle,
,
,
, "Pump out" and "Drying
,
, "Pump out"
Detergents
Max.
Max.
Dry-
temp.
speed
ing
Ble-
(°C)
(rpm)
ach
90°
1200
60°
1200
40°
1200
60°
800
40°
800
30°
800
-
30°
800
-
30°
0
-
-
40°
800
-
-
-
-
-
-
-
-
-
-
-
1200
-
-
1200
-
0
-
-
Easy iron
By selecting this function, the wash and spin cycles will be modified
in order to reduce the formation of creases. At the end of the cycle
the washer dryer will perform slow rotations of the drum; the EASY
IRON indicator light will switch on, the START/PAUSE indicator light
will flash in an orange colour and the text "END OF CYCLE" will
appear on the display. To end the cycle, press the START/PAUSE
button or the EASY IRON button. For the Silk/Curtains cycle, the
machine will end the cycle while the laundry is soaking; the EASY
IRON indicator light will switch on, the START/PAUSE indicator light
will flash in an orange colour and the text "STOP WITH WATER" will
appear on the display. To drain the water so that the laundry may be
removed, press the START/PAUSE button or the EASY IRON button.
!
It may not be used with the
programmes".
Mini load
This function is recommended for when the load of laundry is
equal to half, or less than half, of the maximum recommended
load (see Table of wash cycles).
!
It cannot be used with the
"Drying programmes".
Max.
Cycle
load
duration
Fabric
Wash
(kg)
softener
7
7
7
3
3
3
1,5
1
1,5
-
-
5
-
-
3
-
-
1,5
-
-
7
-
7
-
-
7
,
,
,
and "Drying
,
,
,
, "Pump out" and
GB
11