Using The Epilation Cap; Using The Shaver Head; Hair Removal - SKINERA SA-501 Manual De Usuario

Using the epilation cap

EN
Use the large epilation cap 1 if you want to epilate large
•
areas of skin.
Use the small epilation cap 9 if you want to epilate small,
•
delicate areas of skin such as armpits or the intimate area.
Place the desired epilation cap on the epilation head 2.
•

Using the shaver head

Press both release buttons 3 and remove the epilation head
1.
2 at the same time.
Place the shaver head 10 on the epilator by pressing it onto
2.
the epilator.

Hair removal

• Skin irritation may occur during and after the epilating
• The best time to epilate or shave is immediately after
• Use a mild body lotion after treatment to reduce skin
1. Make sure the area of skin you wish to epilate is clean, dry
and free of grease.
Slide the on/off switch 4 upwards. You can choose between 2
2.
speed levels:
• level I for sensitive areas of skin or areas where there is
little hair growth;
• level II for larger areas of skin with heavier hair growth;
3. Hold the area of skin you wish to epilate taut with your free hand.
4. Place the epilator at a 90°-angle to the area of skin you wish
to epilate.
5. Glide the epilator slowly against the direction of the hair
growth on the area of skin you wish to epilate.
or shaving process. There is no need to worry.
a shower. The skin must be completely dry before you
begin the process.
irritation.
12