Flicker Settings; System Message - Odys SDV i5 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 134

Flicker Settings

Area
Setting
Area
Setting
Note: The flicker setting is based on the frequency standard of your local power supply.

System Message

Message
Recording
Please Unlock SD Card
No File
Please Change Battery
Memory Full
Card Error
Memory Error
Strobe Is Charging
File Format Error
Deleting
Formatting
Setting
12
Appendix: A
England
Germany
50Hz
50Hz
Portugal
America
50Hz
60Hz
The camcorder is recording a file.
If you insert a SD card and the card is set to "Protected", this message will
show up when the camcorder tries to write data into the card.
When the camcorder is set to Playback mode without any existing file to
play, this message will show up.
The battery life of the camcorder is low. You should replace the battery with
a new one immediately.
The storage memory is full and can not store any more files. Please change
the SD/MMC card or delete some files to free some memory space.
The inserted card is not compatible with the camcorder. Please change the
card or try formatting the card.
The camcorder can not access data in the internal memory.
Please format the medium to solve this problem.
The flash strobe is charging.
The file being played is not compatible with the camcorder.
The camcorder is performing file deletion.
The camcorder is formatting the storage medium.
The camcorder is performing a setting action.
France
Italy
50Hz
50Hz
Taiwan
China
60Hz
50Hz
Description
Spain
Russia
50Hz
50Hz
Japan
Korea
50/60Hz
60Hz

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido