Pinnacle Studio AV/DV Deluxe Guia De Inicio Rapido página 13

Recorder: DV device
Devices that connect to the board include any DV or Digital 8 format video
equipment that has an IEEE-1394/DV connector. On many devices, this
connector is labeled "i.LINK".
If you have not already done so, connect your DV camcorder/VCR to the
Studio AV/DV Deluxe board. Use the IEEE-1394 AV cable included in the
package.
1. Connect the IEEE-1394 cable to the Studio AV/DV Deluxe.
Connect the 6-pin connector of the IEEE-1394 DV cable to one of the
1394 data ports of your Studio AV/DV Deluxe.
2. Connect the IEEE-1394 cable to the DV device.
Connect the 4-pin connector of the IEEE-1394 AV cable to the DV
IN/OUT connector of your DV camcorder/VCR.
Pinnacle Studio AV/DV Deluxe can output either to DV or to analog, but
not both at the same time. You can select the active output later in Studio by
choosing Options/Make Tape.
9
Quick Start Guide