Jabra SUPREME Manual De Instrucciones página 7

2. Turn the Jabra Supreme on
3. The first time you turn the Jabra Supreme on it will automatically enter into pairing
mode. The connectivity icon on the Status Display will flash with a blue light
and you will be voice guided through the pairing process. If you have disabled
the Voice guidance go to the Bluetooth settings menu on your phone/device
and search for new Bluetooth devices .Choose Jabra Supreme. When pairing is
complete you will hear "Connected". You are now ready to start using your Jabra
Supreme.
NOTE: If asked for a passcode or key use 0000 (four zeros).
PAIR A NEW OR SECOND DEVICE
1. Ensure that the Jabra Supreme is
turned on
Tap the Voice Control button. You will
2.
be asked to "Say a command".
3. Say "Pair new device" and follow the
instructions.
4. If this is your second device you will
need to reconnect to the first device afterwards
Note: If you have disabled Voice Guidance and Control you can put Jabra Supreme in
pairing mode manually by holding the Answer/end button while flipping the boom arm
to ON position. The Status Display will flash blue to indicate that you are in pairing mode.
USING YOUR JABRA SUPREME
ANSWER CALLS
When you have an incoming call, wait for Jabra Supreme to announce the caller. Say
"Answer" to accept ,or "Ignore" to reject the call. Additionally, you can tap the Answer/end
EN
3