Automatic Switch Off; Overload Indication - König HC-PS220 Manuale De Uso

• Lithium batteries included (CR2032). Please remove the isolation sheet from the battery contacts
before using! Replace the batteries when the low battery indication shows!
OPERATION INSTRUCTIONS
• Step 1: Put the scale on a hard fl at surface (avoid carpets or any soft surfaces)!
• Step 2: Switch on the scale by slightly tapping on the glass platform near LCD display. Than wait a
few seconds till the following symbols appear on the screen:
NOTE: The scale will not work properly if you step on the scale before it shows
If this happens please go back to the step 2!
• Step 3: Gently step on the scale. Put your feet evenly on the scale without moving and wait while
the scale compute your weight! Your correct weight will be displayed on the screen in the following
format:

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically switch off.
(If no weighing is carried out while the zero is being displayed, the scale will automatically switch itself
off after approximately 6 seconds.)

OVERLOAD INDICATION

If the scale is overloaded (over 180kg/396lb/28st), the following symbol appears on the LCD display:
ENGLISH
2
or .