Reversing The Door Swing - NewAir AB-600B Manual Del Propietário

REVERSING THE DOOR SWING

Tools needed: flathead screwdriver, Phillips head screwdriver
CAUTION: Before you begin, unplug the fridge from power.
To remove the door:
1. Using a flathead screwdriver carefully pry the plastic hinge cover off.
2. Using a Phillips head screwdriver, remove the screws and take off the top
hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a Phillips head
screwdriver.
To reinstall the door:
1. Using a flathead screwdriver, remove the plugs and cover from the opposite
corner of the top front of the fridge. Set aside.
2. Install the bottom hinge at the opposite corner and fasten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top hinge.
5. Push the plugs and covers into the corresponding holes on the original hinge
insert.
Main Fridge Body
www.newair.com
Screws
EN
13