oneConcept 10029960 Manual Del Usuario página 23

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

In the Low Alarm Mode press the SET key to select the following alarm modes:
Time alarm (hour/minute)
Indoor humidity low alarm
Indoor temperature low alarm
Outdoor humidity low alarm
Outdoor temperature and dew point low alarm
Pressure low alarm
In the alarm modes, Press + key or MIN/MAX key change or scrolls the alarm value. Hold
the + key or MIN/MAX key for 3 second to change the number in great step. Press the
ALARM key to choose the alarm on or off (if alarm is enabled, the speaker icon on the LCD
will be turned on indicating the alarm function has been enabled). Press the SET key to
confirm the setting and continue pressing the SET key to toggle through each alarm mode
until it returns to the normal display mode.
Press SNOOZE/LIGHT key or key idle 10 second at any time, the alarm mode will return
to Normal Mode
Canceling the Temperature Alarm While Sounding
a. When a set weather alarm condition has been activated, that particular alarm will sound and
flash for 120 second. Press any key to mute the alarm. When weather alarm condition was
activated again within 10 minutes, alarm will not sound but will continue to flash until weather
conditions have become more steady. This feature is useful to avoid repeated triggering for the
same alarm value.
b. The alarm will reactivate automatically once the value has fallen below the set value, or if a
new value is entered.
The outdoor weather alarm
When a set outdoor weather alarm has been triggered, it will flash on the LCD display and
the general outdoor alarm icon and high/low alarm icon will flash accordingly. For example in
outdoor temperature display mode, when dew point high alarm is triggered, DEW POINT icon
will flash along with general outdoor alarm icon and high alarm icon flashing, telling that the
current alarm source is from dew point.
23

Publicidad

Tabla de contenido
loading

Tabla de contenido