MiniMed Quick-serter MMT-305QS Guia Del Usuario página 8

4. Thoroughly brush the entire surface using a soft-bristled
toddler toothbrush. Pay close attention to brushing hard-to-
clean areas until visibly clean.
5. Rinse the serter with running room temperature tap water for
at least 30 seconds and until all visible liquid soap is gone.
6. Thoroughly inspect the insertion device. If any dirt is visible,
then repeat steps 3 to 5.
7.
Shake off any excess water or moisture, and place the serter
on a clean, dry cloth to air dry.
Store serter in the released position to maintain optimum product
performance and life.
©2015 Medtronic MiniMed, Inc. All rights reserved.
MiniMed and Quick-serter
™
Ivory is a registered trademark of The Procter & Gamble Company.
®
are trademarks of Medtronic MiniMed, Inc.
™
- 4 -