Descargar Imprimir esta página

SFA SANICONDENS Eco Instrucciones De Instalación página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
8
STANDARDS
SANICONDENS
Eco/Basic conforms to the European
®
directive 89/336/CEE on electrical safety.
INSTRUCTIONS INTENDED SOLELY FOR
QUALIFIED PROFESSIONALS
9
DISASSEMBLY
If a breakdown occurs, any service on the unit should be
carried out by a qualified engineer. In particular the
replacement of the power cable.
Disconnect the electrical supply before carrying out
work on the unit.
10
TROUBLESHOOTING
INSTRUCTIONS RESERVED SOLELY FOR
QUALIFIED PROFESSIONALS
Disconnect the electrical supply before carrying out any work.
FAULT DETECTED
PROBABLE CAUSES
• The pump does not start
• The pump is not
connected to the power
supply
• Power cut
• Float blocked
• Condensates inlet pipe
blocked
• The pump does not lift
• Non-return valve blocked
• Discharge pipe blocked
11
GUARANTEE
SANICONDENS
Eco/Basic SFA is guaranteed for 2 years
®
for parts and labour, subject to correct installation and use
of the unit.
ACTION NEEDED
• Plug in the unit.
• Check the mains voltage.
• Clean the SANICONDENS
®
Eco/Basic tank.
• Clean the SANICONDENS
®
Eco/Basic inlet pipe.
• Clean the valve.
• Clean the discharge pipe.

Publicidad

loading

Este manual también es adecuado para:

Sanicondens basic