Options - Mvision SX-5 USB Manual Del Usuario

MENU GUIDE
II. Installation
II-4. Terristrial Search
1. Select Channel Search in Installation using
and press OK.
2. 1) Select the region where you are using ◀ ▶.
2) You can select searching type which you want
among Auto and Manual using◀ ▶.
3) Auto
a) Select 'Search'on the Screen and pres OK button
to scan channels.
b) Press Exit or Menu after finishing scanning.
4) Manual
a) Select Mux Channel which you want using ◀ ▶.
b) Frequency will be displayed automatically
according to selected Mux Channel.
II-5. Factory Default
Use Factory Default function only when you want
to return the receiver to the condition of factory
default. All settings and channels will be deleted.
1. Select Factory Default in Installations using ▲▼
and press OK.
2. Message box displays on the screen.
3. Select OK to return the receiver to the condition of
factory default and then press OK.
4. Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
18
▲▼
MENU GUIDE
III. Options
This section may help you to set up OSD language,
time, etc. Select Options in Main Page using
and press OK.
Press EXIT to return to the previous menu or
press MENU to go to the current live channel.
III-1. OSD Setup
III-2. Control Panel
III-3. Time Adjust
III-4. Parental Lock
III-5. Network
III-1. OSD Setup
1. Select OSD Setup in Options using ▲▼ and
press OK.
a) OSD Language
- Press OK to display OSD Language list.
- Select the language that you want and then
press OK.
b) Audio Language
- Press OK to display Audio Language list.
- Select the language that you want and then press OK.
c) Display Info Bar
- Press OK to display Display Info Bar time list.
- Select the second that you want to display and then press OK.
d) OSD Position
- Press OK to change Horizontal and Vertical Position of the OSD.
- OSD Position box displays on the screen.
- Select Hor Position / Ver Position using ▲▼.
- Move the OSD Position to right/left or up/down using ◀ ▶.
- Select OK on the OSD Position box and then press OK.
e) Screen format
- Press OK to display screen format list.
- Select the format that you want and then press OK.
2. Press EXIT to return to the previous menu or press MENU to go to the current live channel.
▲▼
19