Ahrend Mehes Manual página 37

Maintenance
These instructions for maintenance are intended for
both the professional cleaner and the user of the work-
station. Never use benzine, acetone, turpentine, petrol
or other aggressive substances, solvents or abrasive
cleansers.
Maintenance-free parts
With normal use the runners of the drawers and pull-out
frames should not require any maintenance.
Cleaning work surfaces
Normal stains (coffee, tea, pencil,
lipstick, finger marks, grease, water
soluble glue, felt tip pen ink etc.)
can be removed with a clean, damp
cloth. If necessary, a little soft soap
may be added to the water and a
soft nylon brush may be used to
treat more stubborn stains.
Solvent-based lacquer, glue, nail
varnish, ballpoint pen ink etc.
should be removed with an organic
solvent, such as methylated spirits.
36
Service
We advise you to contact your supplier when moving
offices or reconfiguring the workstation.
Cleaning veneered work surfaces
Wipe with a clean, damp cloth if
necessary. A little soft soap may be
added to the water to treat more
stubborn stains.
English
Cleaning plastic parts
All plastic parts may be cleaned with
a soft cloth, dampened if necessary.
More stubborn stains caused by
glue, felt tip pens, ballpoints etc.
can be treated with lukewarm
water and a little soft soap,
if necessary.
Cleaning chrome-plated and
enamelled metal parts
All coloured metal parts may be
cleaned with a soft cloth, dampened
if necessary.
More stubborn stains caused by glue,
felt tip pens, ballpoints etc. are best
treated with lukewarm water and a
little soft soap. Methylated spirit
may be used if necessary.
Locks
The efficient working of locks can
be promoted by spraying a special
lubricant (such as Lubrikote)
sparingly into the cylinder.
Tools
A service kit containing the tools
required for Mehes is available from
Ahrend.
Ahrend code 0160 9714.