Technical Specifications; Standard Symbols - Forum Technologies Implant Locator Manual De Instrucciones

Technical Specifications

13
Implant Locator belongs to the following category of medical devices:
• Internally powered equipment
• Type B applied parts
• Not suitable for use in the presence of flammable anesthetic
mixtures with air, oxygen or nitrous oxide
• Continuous operation
• Ingress of liquids – not protected
• The device is intended for indoor use only
• Environmental conditions during storage/transportation:
- Temperature: -20 ºC to +60 ºC (-4 ºF to 140 ºF)
- Relative humidity: 10% to 90%, non-condensing
- Atmospheric pressure: 106 kPa to 19 kPa
• Operational ambient environmental conditions:
- Temperature 10 ºC to +40 ºC (50 ºF to 104 ºF)
- Relative humidity: 10% to 90%, non-condensing
- Atmospheric pressure: 106 kPa to 70 kPa
16
Implant Locator is intended for use in electromagnetic environment specified
for equipment of Group 1 Class B.
Specifications:
Dimensions: 215 x 45, dia. 21 mm
Weight: 60 gr.
Type of display: LED segments
Power source: 1 x 1.5V AA alkaline primary battery

Standard symbols

14
Device marking includes the following standard symbols:
Type B applied part
Direct current
Recycling: PLEASE DO NOT THROW AWAY! This product and all its
components must be recycled through your supplier
Device label includes the following standard symbol:
Date of manufacture
Manufacturer
Consult instructions for use