Sartorius Ex Instrucciones De Instalación página 14

14
> To optimize system performance, the size of the receive
and transmit buffers and the setting for the latency
timer can be adjusted.
> To use the YCO01-Y in conjunction with an FCT01-X or
CIXS3 indicator or equipment from the FC..-X or IS..-.X
series of scales, the following settings are recommended:
– Receive (Bytes): 64
– Transmit (Bytes): 64
– Latency Timer (msec): 1
§ Click on "OK" to save the settings, and then exit the
"Device Manager" and the "Control Panel."
The application software can now communicate with
the YCO01-Y interface converter over the selected COM
port to address the device connected to the YCO01-Y
converter.