Reversing The Door - Klarstein PopLife 10032751 Manual Del Usuario

Internal Cleaning
Wipe up any internal spills immediately with a soft cloth moistened with a mild detergent
solu tion. Dry thoroughly.
Shelves and Guards
Any shelves can be removed and cleaned separately.
Door Seals
Ensure that the door seals are kept free from debris at all times. If they don't seal
properly this can waste energy and cause refrigeration unit to over run

REVERSING THE DOOR

The door of the cooler can be reversed quite easily. See the illustration below. It is best
if you have a friend help you due to the weight, and to assist with alignment. . Always
unplug the cooler before reversing the door.
1 Support the door from the bottom
2 Remove the 6 screws that affix the hinges and spacers to the cabinet frame
3 Place the door on a flat, padded surface to prevent scratching
4 Remove the 6 screws that affix the hinges to the door
5 Remove the blanking plugs from the opposite side and use those to plug the holes
exposed by the removal of the hinge from the cabinet frame
6 Screw the hinges to the opposite side of the door
7 Pick up the door and carefully align it with the cabinet holes
8 Screw the remaining 6 screws in to both hinges and the 2 spacers into the cabinet
to secure the door.
EN
13