Overload Indicator; Changing Batteries; Cleaning And Maintenance; Disposal Of Used Batteries - Sencor SKS 5020WH-NA Manual Del Usario

SKS 5020WH-NA / SKS 5021GR-NA / SKS 5022BL-NA / SKS 5023OR-NA / SKS 5024RD-NA / SKS 5025VT-NA / SKS 5026YL-NA / SKS 5027TQ-NA / SKS 5028RS-NA

OVERLOAD INDICATOR

If the scale is overloaded (max. capacity 5 kg), the display will show the symbol "EEEE". Remove the
food from the scale immediately so as not to damage the scale.
CHANGING THE BATTERIES
If the display shows the dead battery "Lo" icon, it is time to change the batteries.
1) Remove the battery compartment cover on the bottom part of the scale.
2) Remove the old batteries.
3) Place one 3V type CR2032 lithium battery into the battery compartment. Pay attention to the
polarity. The positive pole must always be facing upwards.
Warning
• If you will not use the scale for a long time, store it in a horizontal position. This position
better protects the sensitive sensors located in the scale footings.
• Do not place or leave any objects on the scale that may place unnecessary stress on the sensors.
• Strong magnetic fi elds may negatively infl uence the weighing precision. Do not use the scale
in environments with strong magnetic fi elds.

CLEANING AND MAINTENANCE

To clean the outer parts of the appliance, use a soft cloth dipped in lukewarm water.

DISPOSAL OF USED BATTERIES

This product comes with one alkaline battery. Do not place used batteries into regular household waste.
Instead, use the appropriate waste collection and recycling centres.

TROUBLESHOOTING

If the scale is displaying random values or if it is not turning off automatically, you need to restart it.
In such cases, remove the batteries for about 10 seconds and place them back again. The scale should
work normally again.
Copyright © 2014, Fast ČR, a.s.
Kitchen scale
EN-6
Revision 10/2014