Sync With Your Scale - Greater Goods Weight Gurus Manual Del Usario

Sync With Your Scale

Weigh to Sync
Once setup has been completed, simply weigh to sync measurements to your
device. Syncing will occur to your user account as long as your phone is within
Bluetooth range and the Weight Gurus app is running.
After weighing, the Bluetooth symbol will begin flashing as it
attempts to pair to the correct device. A solid Bluetooth symbol
indicates a successful connection to your device.
The data symbol indicates measurement data is waiting to be
synced to your device. Upon successfully syncing, this will go
away. If measurements are not synced, it will display the next
time you weigh, indicating unsynced measurements.
Tips
Your scale will give an audible beep when it turns on, when measurments are
completed, and once again when it has successfully synced to your device. If
syncing cannot be completed at the time, three short beeps will indicate a failed
sync. If a failure occurs, your measurements will store in the scale and attempt to
sync the next time you complete weighing.
Although it's possible to view your results from many devices (such as both your
mobile phone and your tablet), only one device can pair and sync to a scale for
each user. Below are a few examples to further explain how pairing may work for
you.
Pairing Examples
Multiple devices can pair with one scale - e.g. Husband and wife with seperate phones
Multiple users can share one device and pair to one scale - e.g. Husband and wife
sharing one tablet
One user can pair to many scales - e.g. You own more than one Weight Gurus
Bluetooth scale
One user can pair to one scale from multiple devices - e.g. You cannot pair both your
phone and tablet to the same scale.
Yes
Yes
Yes
No
8