Usage Instructions - Brunton Explorer Informations Générales De Sécurité

Usage Instructions

1. Unfold the BRUNTON Explorer unit in a brightly sunlit area.
Make sure the panels of the unit are directed towards the
sun and there are no objects obstructing the light reaching
the panels.
2. Plug a USB cable into the BRUNTON Explorer unit.
3. Plug the other end of the cable into the 5V electronic device
needing to charge.
4. Wait until the electronic device is fully charged.
5. Unplug the USB cable from the electronic device.
6. Unplug the cable from the BRUNTON Explorer.
7. Use your BRUNTON Explorer to recharge the electronic
device as necessary.
BRUNTON, Limited Warranty
BRUNTON warrants this product to be free of defects in materials
and workmanship for a period of one year. This warranty extends to
the original purchaser for one year from the date of purchase.
This warranty is void and a charge for repair will be made if the
product has been damaged by negligence, accident or mishandling,
or has not been operated in accordance with standard operating
procedures, or if the product was altered or repaired by other than
a BRUNTON repair facility.
6