Assign An Ip Address In A Single Device; Assign Ip Addresses In Multiple Devices - Axis 212 PTZ Guia De Instalacion

AXIS 212 PTZ/ AXIS 212 PTZ-V Installation Guide
AXIS Camera Management
AXIS Camera Management can automatically discover multiple Axis devices, show
connection status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. In the window that appears double-click AXIS 212 PTZ
to open the camera's home page.
3. See page 10 for instructions on how to set the password.Set the IP address in multiple
devices.

Assign an IP address in a single device

1. Select AXIS 212 PTZ in AXIS Camera Management and click the Assign IP button.
2. Assign the following IP address and enter the IP address, the
subnet mask and default router the device will use.
3. Click the OK button.

Assign IP addresses in multiple devices

1. AXIS Camera Management speeds up the process of
assigning IP addresses to multiple devices, by suggesting IP
addresses from a specified range.
2. Select the devices you wish to configure (different models
can be selected) and click the Assign IP button
3. Select Assign the following IP address range and enter the
range of IP addresses, the subnet mask, and default router the
devices will use.
4. Click the OK button.
Note:
AXIS 212 PTZ/AXIS 212 PTZ-V will display in AXIS Camera Manage-
ment as AXIS 212 PTZ.
.
Page 9