9. SPECIFICATIONS
Thermal nominal power LOG (Oak, beechwood...)
Power transmitted to the atmosphere (useful)
Mass of fuel / hour
Average gas temperature
Average CO concentration at 13% O2
Performance
TYPE TEST CERTIFICATE NUMBER
AGENCY NOTIFIED NUM.
Accepts logs of the following length:
Front door:
Fumes ring
Metal Chimney
Recommended chimney height
Brickwork chimney, at least (approx.)
Smoke outlet
Minimum draw recommended
Primary Air Control
Weight
WARNING! Your insert fireplace should not be used as an incinerator and no other types of fuel
should be used (plastic, coal...). Use recommended materials only.
Recommended fuel:
Fuel
Beechwood
Oak
Pine wood
EQI-70
Height
Width
Dimensions L x Ø
40cm x 7cm (approx.)
40cm x 7cm (approx.)
40cm x 7cm (approx.)
Technical data
Fireplace approved in
accordance
with
Standard:
UNE-EN
13229:2001
"Inset
appliances
including
open
fires
fired by solid fuels.
Requirements and test
methods", modified by
UNE-EN
13229/AC,
UNE-EN
13229/A1:2003
and
UNE-EN
13229:2002/A2:2005.
16 kW
9 kW
4 kg
350 ºC
0.3
75%
LEE-014-09
NB 1722 (CEIS)
400 mm.
290 mm.
585 mm.
150 mm.
Int.
150 mm.
Int.
5 to 6 metres
200 x 200 mm.
Vertical
12 Pa
Manual regulation
145 kg
Maximum load per hour
4 kg
4 kg
4 kg