Connect Appliance - Gaggenau AR 400 742 Instrucciones De Instalación

3 Fasten the appliance to the wall using
Alternative:
four screws.
Note: Align the appliance horizontally.
4 Secure the exhaust air pipe to the connecting piece
and seal appropriately.
8

Connect appliance

Connecting the power cable
The appliance has to be connected to the power supply
by means of a 3-wire conduit installation with a 1 inch
conduit.
1 Remove terminal block cover by unscrewing the
3 fixing screws and lift it off.
2 Guide conduit through the opening for electrical
connection in the holding fixture
3 Secure the conduit with the ring nut
4 Connect the wires of the power cord with the
terminal block (C) and tighten terminal screws
securely. Connect as follows:
‒ L = connect to hot wire
‒ N = connect to neutral wire
<
‒ = Connect to ground wire
5 Replace terminal block cover and fasten it with the
3 fixing screws.
.
(A)
.
(B)