Furrion DV3300S-BL Manual De Instrucciones página 23

Operation
Note: The function is only available for video
playback.
Play frame by frame
1. During DVD/VCD playback, press STEP on
the remote control consecutively to play
frame by frame forward.
2. Press to resume normal playback.
Play repeatedly
Repeat One / All
1. During DVD playback:
Press RPT to select REP CHAPTER, REP
TITLE, REP ALL, or REP OFF.
2. During VCD (PBC OFF)/CD playback:
Press RPT to select REP ONE, REP ALL,
or OFF.
The RPT button is unavailable when PBC
is enabled during VCD playback.
3. During MP3/WMA playback:
Press RPT to select REP ONE, REP DIR,
REP ALL, or OFF.
Repeat A-B
Use this function if you want to repeat a
specific segment on a disc that you define:
1. Press A-B at a point (A) where you want
it to be the start point of the repeat
segment.
2. Press A-B again at a point (B) where you
want it to be the terminal point of the
repeat segment.
Then the segment will be played
repeatedly.
To cancel A-B repeat mode and resume
normal playback, press A-B for the third time.
Note:
During DVD/VCD/MP3/WMA/CD playback,
points A and B must be within the same track.
Play from a specified chapter / track
or specified time
During DVD playback:
1. Press SEARCH on the remote control to
display a search box, with the title field
highlighted.
2. Use the number buttons to input the
serial number of a title.
3. Use the navigation buttons to highlight
the chapter field, and then use the
number buttons to input the serial
number of a chapter.
4. Press OK or to play the selected
chapter.
During VCD/MP3/WMA/CD playback:
1. Press SEARCH on the remote control to
display a search box, with the track field
highlighted.
2. Use the number buttons to input the
serial number of a track, and then press
OK or to play the selected track.
Play randomly
During DVD/VCD (PBC OFF)/MP3/WMA/CD
playback, press RDM once or more to switch
between RANDOM ON and RANDOM OFF.
In RANDOM ON mode, the chapters / tracks
will be played randomly.
Play from different angles
During DVD playback, press ANGLE on the
remote control once or more to view from
different angles.
Note:
− This function is only available for discs
recorded with different camera angles.
− The ANGLE button is unavailable for VCD/
MP3/WMA/CD discs.
Zoom in / out during playback
1. During DVD/VCD playback, press ZOOM
on the remote control once or more to
enlarge a certain area of the images on
the screen with these multiples:
ZOOMx2, ZOOMx3, ZOOMx4, ZOOMx1⁄2,
ZOOMx1⁄3, ZOOMx1⁄4, ZOOM OFF.
2. Press one of the navigation buttons to
select the area you want to enlarge.
22