EMERGENCY
OPENING
OPENING THE LOCK
Press
Enter the set code
(User or Master)
Press
After 2/3 seconds turn or pull the
handle and open the door
CLOSING THE LOCK
Close the door, turn the handle
(The door closes automatically)
OPENING WITH SET TIME DELAY
Press
Enter the set code
(User or Master)
Press
The Time Delay starts
The opening window starts
Enter the code again
Press
After 2/3 seconds turn or pull the
handle and open the door
BORDOGNA CASSEFORTI · Viale Europa, 37 - 25036 Palazzolo sull'Oglio (BS) - ITALY · Tel. +39 030 7406011 · Fax + 39 030 7401649 · email: info@bordogna.com · www.bordogna.com
85.012.175 - rev. 02/16
After opening the lock, open the door within 10 seconds. If maximum time is exceeded, the door closes automatically
When an invalid code is entered for the third consecutive time, the lock blocks for two minutes leaving the red LED on
Right code
Wrong or deactivated code
Right code
Wrong code
every 2 seconds
Right code
Wrong or deactivated code
ELECTRONIC LOCK BMZ66SC-CMT-AZZURRO
The battery must be placed in the black box positioned inside the door
You have a maximum of 10 seconds for each key entry
The lock is provided with the following Factory Codes: User 204060 and Master 999999
Ensure that you only program the lock when the door is open
After changing the code always try the code several times with the door open
The lock has Time Delay. Long Time Delays imply higher battery consumption
Caution! Don't forget your code, the lock can not be used anymore
Please keep your instructions in a safe place together with the guarantee
CHANGING USER CODE
The door and must be open
Press
Enter the opening code already set
(User or Master)
Press
and
Enter the new User Code
Press
Enter the new User Code again
Press
CHANGING MASTER CODE
The door and must be open
Press
Enter the Master Code already set
Press
,
and
Enter the new Master Code
Press
Enter the new Master Code again
Press
USER MANUAL
Main instructions
Powered by a rectangular 9v alkaline battery (not supplied)
Unique variable 6-10 numbers/letters code
Temperature of use: from 0° to 50° C
Right code
Wrong code
Right operation
Wrong operation
(not set code)
Right code
Wrong code
Right operation
Wrong operation
(not set code)
CONTINUES...
72.010.214